Corrosion Resistance Of 2205 Duplex Steel pipe

 2205 duplex stainless steel is a cost effective solution for many applications where the 300 series stainless steels are susceptible to chloride stress corrosion cracking. Stress corrosion cracking occurs when stainless steels are subjected to tensile stress, while in contact with solutions containing chlorides. Increasing temperatures also increase the susceptibility of stainless steels to stress corrosion cracking.We have wide range of sizes in our stock of 2205 Duplex Stainless Steel Pipe & 2507 Super Duplex Stainless Steel tube,S31803 Welded Pipes Tubes .

2205 steel has excellent corrosion resistance and is superior to grade 316, performing well in most environments where standard austenitic grades may fail. 2205’s low carbon content gives the grade a high resistance to intergranular corrosion and has better resistance to uniform, pitting and crevice corrosion due to its high chromium and molybdenum content. As 2205 is a duplex stainless steel, the grade is also less sensitive to stress corrosion cracking in warm chloride environments, unlike austenitic stainless steels. The grade also has good resistance to stress corrosion cracking when exposed to hydrogen sulphide in chloride solutions.High mechanical strength combined with excellent corrosion resistance gives 2205 high corrosion fatigue resistance.

What are the characteristics of Duplex 2205?

  • High resistance to chloride stress corrosion cracking
  • Resistance to chloride pitting and crevice corrosion
  • Good general corrosion resistance
  • Good sulfide stress corrosion resistance
  • High Strength
  • Good weldability and workability

评论

发表评论

此博客中的热门博文

What Is Welding Neck Flange

图片
Welding Neck Flanges  are easy to recognize at the long tapered hub, that goes gradually over to the wall thickness from a pipe or fitting. The long tapered hub provides an important reinforcement for use in several applications involving high pressure, sub-zero and / or elevated temperatures. The smooth transition from flange thickness to pipe or fitting wall thickness effected by the taper is extremely beneficial, under conditions of repeated bending, caused by line expansion or other variable forces. These flanges are bored to match the inside diameter of the mating pipe or fitting so there will be no restriction of product flow. This prevents turbulence at the joint and reduces erosion. They also provide excellent stress distribution through the tapered hub and are easily radiographed for flaw detection. This flange type will be welded to a pipe or fitting with a single full penetration, V weld (Buttweld).
阅读全文